ANALYSIS TOOL OVERHANG IN THE MACHINE CNC ET-242 ON SURFACE ROUGHNESS WITH VARIATION OF FEEDING
DOI:
https://doi.org/10.31328/jsae.v1i1.551Abstract
Lathe is a process to get the shape of the cylindrical workpiece by rotating the workpiece on the spindle and moving the chisel towards the workpiece. To be able to screw the workpiece of the chisel should hang and extend from the turret. The length of the hanging chisel is called the tool overhang (Zelinski, 2005: 1). There is no definite hint of setting the tool overhang and only adjusted between the position of the turret and workpiece. In order to achieve a good surface roughness, usually the overhang tool is arranged to a minimum.In this study the independent variables used are the tool overhang 14 mm, 21 mm, 28 mm, 35mm and feeding 0.15 mm rotation-1, 0.25 mm rotation -1, 0.35 mm. rotation -1. The measured dependent variable is the surface roughness of the workpiece.From the results of testing and data analysis can be concluded that the tool overhang effect on the roughness of the workpiece surface results of the process of lathe in various variations of feeding (feeding). The longer the tool overhang and the greater the feeding motion will result in greater surface roughness. The lowest surface roughness was obtained from a 14 mm long overhang tool and feeding 0.15 mm rotation-1.Keywords : Â Machine CNC ET-242, Surface Roughness, Feeding Variation.References
Armanto, H. & Daryanto. 1999. Ilmu Bahan. Jakarta: Bumi Aksara.
American Standard Testing of Material (ASTM).
Black, Paul H.1961. Theory Of Metal Cutting. New York: McGraw Hill Book Co.
Boothroyd, Geoffrey.1983. Fundamental Of Metal Machining And Machine Tool.Tokyo: McGraw Hill Book Co.
Bangalore, HMT. 1978. Production Technology.New Delhi: McGraw Hill Book Co.
Cooperrider, Bryan.1997.General Lathe Information.
http://www.prl.stanford.edu/documents/obsolete/lathe.pdf
Degarmo, Ernest P, JT Black, dan RA Kohser.1988. Material And Process In Manufacturing 7th edition.New York: Macmillan Publishing Company
Drew,T Wayne. 1963. Machinery Repairman. http://metalworking.com/disort.php/Navy-Repairman-Manual-Chapter06.pdf
Failli, F, M. Beghini, G. Dini, M. Santochi, G. Tantussi.1998. A sensor integrated tool for two-components cutting force monitoring.Pisa: Department of Mechanical, Nuclear and Production Engineering, University of Pisa, Pisa,Italy.
http://www2.ing.unipi.it/~dimnp/CD/supporto/pdf/failli_beghini_ santochi_dini.pdf
Hifni, M.1992. Analisis Varian & Penerapannya. Malang: Kopma Press.
Kalpakjian, Serope.1990. Manufacturing Engineering And Technology. Illinois: Addison Wesley Publishing Co.
Keraita,J N, H. J. Oyango, and G. K. Misoi.2001. Lathe Stability Charts Via Acoustic Emission Monitoring.Kenya. African Journal of Science and Technology (AJST) Science and Engineering Series Vol. 2, No. 2, pp. 81-93
Rao, P N.2002. Manufacturing Technology: Metal Cutting and Machine Tools. Singapore: McGrow Hill Book Co.
Rochim, Taufiq.1993. Proses Permesinan.Bandung: Penerbit ITB
Sharma, PC.1983. A Text Book Of Production Engineering.New Delhi: S Chand & Company Ltd.
Thomas, M, Y Beauchamp.2003. Statistical Investigation of modal parameters of cutting tool in dry turning.Quebec.
Thomas, M, Y Beauchamp, A Youssef, J Masounave. An Experimental design for surface roughness an build up edge formation in lathe dry turning. Montreal.
Vernon,Aaron, Tugrul Ozel.2003.Factors Affecting Surface Roughness in Finish Hard Turning.New Jersey.
www.soe.rutgers.edu/ie/research/working_paper/paper%2003-104.pdf
www.mmsonline.com/articles/010301.html
Zelinski,Peter.2005.The Overhang Effect.
